detail card
英 [ˈdiːteɪl kɑːd]
美 [ˈdiːteɪl kɑːrd]
明细卡
双语例句
- This detail level includes generic counters ( including processor, disk, memory, and more) and specific counters ( including network card interfaces).
该详细级别包括一般的计数器（包括处理器、磁盘、内存，等等）和具体的计数器（包括网卡接口）。 - Construction and work principle of electronic throttle are introduced in detail, an electronic throttle detection system based on PCI-1712 data acquisition card is designed and realized.
介绍了电子油门的结构与工作原理，设计并实现了基于PCI-1712数据采集卡的电子油门检测系统。 - You have to register before you make long distance call, please refer to overleaf for registration detail, once 'UNICOM EXPRESS' card number is registered to a telephone number, it cannot be cancelled.
拨打国际长途电话前必须先登记，登记方法请参阅背页：'联通快线'卡一经登记，不可取消。我要打国际长途到广东。 - And then the paper discusses the design of parallel interface unit in detail, which includes two segment, the writing and reading realization of CompactFlash card and parallel branching realization.
然后详细阐述了并行接口单元的设计，并行接口单元的设计是高速CF卡阵列固态存储技术研究的重点。 - Based on the examination and calibration in detail, the sound card, as the standard hardware in computer, is used for monitoring the data acquisition on pulse NMR experiment with shareware or freeware.
通过对计算机标准配置资源声卡的性能检测及标定，使其达到物理实验测量数据定量分析的教学要求，同时利用免费的简易程序实现多通道数字信号采集功能并用于观测记录脉冲核磁共振信号。 - The article states in detail the work mode of main station device of receiving card, I/ O card, driving circuit, the devising of sounding circuit using single-chip CPU and introduces the shell devising of RTU.
文章详细阐述了主站的工作模式、接收卡、I／O卡、驱动电路的设计，使用单片机设计大型数码管扫描电路、发声电路等。并对RTU外壳设计要求作了简要介绍。 - This paper analyses the hardware and software of PC-FAX cards in detail. A PC-FAX integrated communication system composed of a Group 3 facsimile apparatus, a personal computer ( PC) and a PC-FAX card is introduced and illustrated.
本文较详细地分析了传真卡的硬件和软件，并对由三类传真机（G3机）、个人计算机（PC）和传真卡等构成的PC－FAX综合通信系统作了介绍和说明。 - The thesis explains the DSP data collecting card based on PCI bus and software design in detail. The data collecting card can be applied to the fields such as digital oscillograph, digital spectral appearance and phonetic recognition etc.
本文对基于PCI总线的DSP数据采集卡硬件及软件设计作了详细的说明，设计出的数据采集卡可以应用于诸如数字示波器、数字频谱仪和语音识别等领域。 - Then, the hardware, image processing of device and the inspection software is illustrated in detail, Including, the selecting of optics device, the mounting position, camera and capture card;
详细讲述了接触网几何参数测量装置的硬件构成方案设计、图像处理过程和检测软件方案设计，这其中包含了装置光学器件的特性参数设计、安装位置参数设计、摄像机及采集卡的选择； - Finally, it illustrates in detail the solutions to the realizations and key technology of the system, including the design of portable IC card read and write device, and the realization of the software.
最后详细论述了系统的实现步骤和关键技术，包括针对本系统所设计的便携式非接触式IC卡读写器的设计以及用户上位机软件的实现。 - The configuration space header layout, configuration theory and access method for PCI bus extended board using bridge adapter are described in detail in this paper. A configuration example of PCI multi-serial port card is also shown.
详细阐述了采用桥接电路的PCI总线扩散板卡的配置空间头标区组成及其配置原理，给出了配置空间头标区访问方法，提供了PCI总线多串口卡的配置实例。 - This thesis discusses in detail how to realize the design of Video Detecting Card based on the system of Video detecting vehicle and automatically recording.
本文以智能交通系统中视频检测违章车辆记录仪的研制与开发为背景，围绕如何实现视频检测检测违章车辆记录仪系统前端视频检测卡的设计，进行了深入的研究和探讨。 - Lastly, on the basis of software modularization, the realization of some modules is explained in detail, such as, real-time control and alarm, management of rights, setting of controller's parameter, management of card and person, query and report, system maintenance.
最后在软件模块化结构的基础之上，着重介绍了实时监控及报警模块、权限管理模块、控制器参数设置模块、卡片及人事信息管理模块、查询/报表模块和系统维护模块等的具体实现过程。 - Chapter 8 designed the magneto data acquisition system in detail. In the aspect of hardware, introduced the selection and usage of sensors and data acquisition card, mainly on WS series sensor and PLC-1800 data acquisition card.
在第8章，具体对磁电机数据采集系统进行设计，硬件上重点介绍了传感器和数据采集卡的选用，着重介绍了本系统选用的WB系列电量隔离传感器和PCL-1800数据采集卡。 - In detail, the author narrates the function and working elements of network card, and the signal processing from baseband to IF to RF, also the protocol process of medium access control ( MAC) layer.
详细讲述了网卡的功能构成、工作原理、从射频到中频到基带的信号处理过程、以及媒体访问控制层（MAC）协议处理方法等。 - This paper introduces and contrasts the characteristic and principle of Radio Frequency card in detail, and specifies the ap-plication in the Integration of the IC Card Management System and the realization of the Bank-Interface sub-system.
本文概要介绍了智能射频卡的工作原理，并重点阐述了该卡在校园一卡通系统中的应用以及银行接口子系统的实现方法。 - Based on the development of IPC data acquisition system for Visual Basic 6.0. expounds the total design plan for system and key technique in detail programme with PCL-818L data acquisition card and VB6.0 database inquire technique are introduced.
基于VB6.0的工控机数据采集系统的开发，详细说明了系统的设计方法和关键技术。介绍了PCL818L数据采集板及VB6.0的数据库访问技术。 - In this paper the operation principle and its application in micro-camera, digital camera, and PC multimedia etc. are described in detail. PC& DAQ system consists of sensors, signal conditioning, data acquisition card, computer and software.
本文详细介绍了其工作原理及其在微型摄像机、数码相机、PC多媒体等中的应用。 - This file in detail describes the development course of the gas measurement charging, the composition of the IC card prepayment gas meter application system, IC card classification and the application analysis for the smart card prepayment gas meter.
本文详细论述了煤气计量收费的发展历程，IC卡预付费煤气表应用系统的构成，IC卡的分类以及智能卡预付费煤气表的应用分析。 - In the next part, it tells how to complete the sub-system of data balance by using Java Card technology in detail. And gives emphasis to the process of design and achievement of Applet on card.
接下来详细介绍了运用JavaCard技术实现数据结算子系统的过程，并着重说明了如何设计和实现卡上的小应用程序。 - The paper describes how to design the system in detail, which includes Ethernet control card design, embedded TCP/ IP protocol stack design and the whole software realization of Ethernet control card.
文章详细介绍了本套网络监控系统的设计思想及过程，内容包括以太网控制卡电路设计，精简的TCP/IP协议栈设计以及以太网控制卡的总体软件设计。 - This article in detail introduces the principle and the method of the conversion between the inhabitant recent and old ID card number, and produces a application case in PowerBuilder and under the Oracle conditions.
文章详细介绍了居民新旧身份证号码之间的转换原理和方法，并给出一个在PowerBuilder和Oracle环境下的应用案例。 - The composing and function of IC card collecting fees system at filling station is introduced in detail. The interface design of IC card reader and writer device is discussed. Hardware circuit and software flow of system is presented.
IC卡的应用领域非常广泛，本文详细介绍了加油站IC卡收费系统的构成、功能，讨论了IC卡读/写器的接口设计，并给出了系统硬件电路和软件流程。 - The paper introduces some key technologies and points for attention in detail during hardware debugging and software development process, which includes the AD conversion accuracy, the external SRAM address mapping, CF card storage format as well as real-time clock reading and writing time sequence.
文中详细介绍了硬件调试和软件开发过程中所涉及的关键技术和注意事项，包括AD的转换精度、外部SRAM的地址映射、CF卡的存储格式以及实时时钟的读写时序等。 - The paper introduced in detail in the Nios II integrated development environment IDE, using the SPI mode development SD card read write function; and the butterfly operation and the Hanning window treatment, achieve the function of spectrum analysis process.
论文详细介绍了在NIOSIIIDE集成开发环境下，采用SPI模式开发SD卡读写功能；以及通过蝶形运算和汉宁窗处理，实现频谱分析功能的流程。 - Detail fraud shall be given extra attention to the important audit procedures, including the questioning, analysis procedures, letter card and prison dish.
详细阐述舞弊审计应当格外注意的重要审计程序，包括询问、分析程序、函证以及监盘。 - This paper makes the detail design and implementation to a campus card management system.
本文对一个功能较为齐全的校园卡管理系统做了洋细的设计与实现。 - This paper introduces in detail the key drive module and a password system under the Linux driver card in Linux system based on.
论文还介绍了基于Linux系统下驱动程序的关键模块和密码卡在Linux系统下的驱动实现细节。 - In this paper, the safety of payment system are analyzed in detail, including RF_SIM card safety system, safety backup and restore data mechanism.
本文对支付系统的安全性进行了详细分析，包括RFSIM卡的安全体系、安全备份与数据恢复机制。 - Schematic design of Mobile Internet Device hardware is presented in detail, including the power supply, microprocessor, serial port, USB port, LCD interface, camera interface, the audio chip, SD card, network interface, TD module and FPGA. 3.
详细设计出移动互联设备的硬件原理图，包括电源、微处理器、串口、USB口、LCD接口、摄像头接口、音频处理部分、SD卡接口、网卡、TD模块接口以及FPGA部分等等。